TheULINK2 User's Guidedescribes theKeil ULINK®2 USB-JTAG Interface Adapterand contains detailed instructions for the hardware and software configuration. ULINK2 is a small hardware adapter that connects the USB port of the PC to the JTAG or OCDS debugging port of the target hardware. Use ULINK2 to:

• Debug and test programs on target hardware.
• Program on-chip or external Flash memory of many devices.

This book contains the following chapters:

• Introduction gives an overview of the ULINK2 USB-JTAG Adapter features, requirements, limitations, supported devices, and CoreSight™ Technology.
• Hardware Description describes the ULINK2 Adapter components, and the start and reset sequences.
• Setup ULINK2 shows the ULINK2 connection interfaces, how to install ULINK2, and the configuration settings needed to debug on ARM or Cortex-M devices.
• Setup Flash Programming describes the Flash download configuration and explains how to create a new Flash Programming Algorithm. Lists the existing Flash algorithms.
• Using ULINK2 describes how to download and debug programs on target devices, and explains target chaining.
• Configure Cortex-M Devices for Tracing explains the settings needed for enabling trace by means of certain devices.
• μVision Windows shows the trace capturing and displaying capabilities of ULINK2, and the μVision windows used to visualize and analyze data.
• Real-Time Agent allows to view and modify the target board's memory contents on-the-fly. Step-by-step instructions explain how to add this feature to the application.
• Appendix lists additional information such as error messages.